The The AN-K is a bookshelf-sized loudspeaker capable of a bandwidth from 50 Hz to 20 Hz (-6 dB) with an efficiency of around 90 dB/m.

Careful pair matching, first by drive unit selection, secondly by pairing drive units with suitable characteristics to each other, and then finally by individually adjusting each speaker's curve, under dynamic conditions to a master curve.

The AN-K cabinet is made from materials that compliment the workings of the chosen drive units, where we, instead of trying to damp the resonances in the cabinet, place them in frequency bands where they aid and enhance the drive unit's work. This novel and quite difficult method helps to ensure maximum efficiency and dynamic behaviour.

Dimensions: (Height, Width, Depth) 470 x 275 x 190mm (18.5" x 10.8" x 7.5").

AN-K/Lx
2-way acoustic suspension with ¾” tweeter and 8 inch bass driver, 90dB efficient, Audio Note™ LEXUS Lx copper speaker cable, all round wood veneered Russian birch plywood cabinet.

AN-K/SPe
As Lx but with AN-SPe silver speaker cable.

AN-K/SPx SE
As Lx but with AN-SPx silver cable, crossover with solid Audio Note™ silver inductors and Black Gate™ bipolar capacitors, Audio Note™ copper foil adjusting capacitors.

AN-K Speaker Stands
21” high mass 4-leg black sprayed steel speaker stand. Self assembly. Designed to be filled with fine lead shot and sand to maximise mass.

 

***Manual AN-K

 


 

The AN-J models offer higher sensitivity and better bass performance, combined with a more dynamic presentation than the AN-K, in an enclosure that is about three times the volume.

The AN-J is a ported enclosure with an efficiency better than 93 dB/m and bass that goes down to 25 Hz at -6 dB. The AN-J is capable of reproducing the scale and intensity of most well-recorded music very realistically.

Like all our other loudspeakers, the AN-J undergoes the same painstaking driver selection and matching process, which ensures the closest tolerances within a pair in the entire audio industry.

Dimensions: (Height, Width, Depth) 585 x 330 x 235mm (23" x 13" x 9.25").

 

AN-J/Lx

AN-J/Lx - 2-way 1" dome tweeter, 8" woofer, rear ported, 93dB sensitivity, all round wood veneered Russian birch plywood cabinet.

AN-J/SPe
As Lx but with AN-SPe silver speaker cable

AN-J/SPx SE
AN-SPx silver cable, crossover with solid Audio Note™ silver inductors and Black Gate™ bipolar capacitors, Audio Note™ copper foil adjusting capacitors.

AN-J/SE Silver
Adds silver voice coils and AN silver foil adjusting caps to the SPx SE.

AN-J SEC Silver

Adds ALNICO magnet to the bass driver of the SPx SE.

 

***Manual AN-J

 


 

 

The AN-E must be the most efficient wide band speaker of moderate size on the market, with an effective bandwidth from 18 Hz to 23 kHz at -6 dB, efficiency better than 95 dB/m and a dynamic headroom above 108 dB. The extremely high efficiency is retained well over the bandwidth, and makes the AN-E very suited to the high quality, low-power triode amplifiers that will form the future of music reproduction, once our obsession with power and specifications is generally recognized as folly.

The AN-E is a two-way, ported enclosure, with a carefully designed cabinet which is shaped to enhance and aid driver dispersion on one hand, and bass output on the other. The cabinet is lightly braced and little internal damping is used. The cabinet is designed in such a way that it augments and supports the drivers in their task, not unlike the box of a guitar. The drivers are selected and paired before they are matched to the crossover in the same process as the AN-K and AN-J.

Dimensions: (Height, Width, Depth) 790 x 360 x 270mm (31" x 14" x 10.5").

Standard Efficiency Model, 94-95dB/watt/meter

 

 

 

The AN-E must be the most efficient wide band speaker of moderate size on the market, with an effective bandwidth from 18 Hz to 23 kHz at -6 dB, efficiency better than 95 dB/m and a dynamic headroom above 108 dB. The extremely high efficiency is retained well over the bandwidth, and makes the AN-E very suited to the high quality, low-power triode amplifiers that will form the future of music reproduction, once our obsession with power and specifications is generally recognized as folly.

The AN-E is a two-way, ported enclosure, with a carefully designed cabinet which is shaped to enhance and aid driver dispersion on one hand, and bass output on the other. The cabinet is lightly braced and little internal damping is used. The cabinet is designed in such a way that it augments and supports the drivers in their task, not unlike the box of a guitar. The drivers are selected and paired before they are matched to the crossover in the same process as the AN-K and AN-J.

Dimensions: (Height, Width, Depth) 790 x 360 x 270mm (31" x 14" x 10.5").


Standard Efficiency Model, 94-95dB/watt/meter

 

 

 

 

 

 

The AN-E must be the most efficient wide band speaker of moderate size on the market, with an effective bandwidth from 18 Hz to 23 kHz at -6 dB, efficiency better than 95 dB/m and a dynamic headroom above 108 dB. The extremely high efficiency is retained well over the bandwidth, and makes the AN-E very suited to the high quality, low-power triode amplifiers that will form the future of music reproduction, once our obsession with power and specifications is generally recognized as folly.

The AN-E is a two-way, ported enclosure, with a carefully designed cabinet which is shaped to enhance and aid driver dispersion on one hand, and bass output on the other. The cabinet is lightly braced and little internal damping is used. The cabinet is designed in such a way that it augments and supports the drivers in their task, not unlike the box of a guitar. The drivers are selected and paired before they are matched to the crossover in the same process as the AN-K and AN-J.

Dimensions: (Height, Width, Depth) 790 x 360 x 270mm (31" x 14" x 10.5").


Standard Efficiency Model, 94-95dB/watt/meter

 



AN-E/Lx
AN-Lexus LX96 copper internal cable, copper voice coils.

AN-E/SPe
AN-SPe17 or on later models AN-SPe19 silver internal cable, copper voice coils.


High Efficiency Models, 97.5 – 98dB/watt/meter

AN-E/LX HE
AN-Lexus LX96 copper internal cable, silver voice coils.

AN-E/SPe HE
AN-SPe17 or on later models AN-SPe19 silver internal cabling, silver voice coils.

AN-E/LX Signature
AN-Lexus LX96 copper cable connecting to external crossover with Audio Note™ copper foil signal capacitors, silver voice coils.

AN-E/SPe Signature
AN-SPe17 or on later models AN-E/SPe19 silver cable connecting to external crossover with Audio Note™ copper foil signal capacitors, silver voice coils.

AN-E/SPx SE Signature
AN-SPx27 or on later models AN-SPx29 and currently AN-SPx31 silver speaker cable connecting to external crossover, with Audio Note™ copper foil signal capacitors and solid silver inductors, silver voice coils.

AN-E/SEC Silver
AN-SOGON LX96 silver internal cabling, AlNiCo speaker magnets, silver inductors with silvered polyester crossover capacitors, silver voice coils.

AN-E/SEC Signature
AN-SOGON LX96 silver speaker cable connecting to external crossover with Audio Note™ copper foil signal capacitors, solid silver inductors, AlNiCo driver magnets, silver voice coils.

AN-E SOGON
The ultimate 2 way speaker, AN-SOGON LX96 silver speaker cable connecting to external crossover with Audio Note™ pure silver foil signal capacitors, soild silver inductors, specially selected and matched AlNiCo drivers with silver voice coils.

 

***Manual AN-E

 

Most popular finishes

 

 

 

Notes: Audio Note (UK) Ltd. reserve the right to change, modify, add to, or remove any of the content (was originated from website www.audionote.co.uk) at any time without prior notice. Further, images on this site may differ from current models or specifications.